Grinder Pumps

FG Series        FNG Grinder Pump        Retro-Fit Systems        WQG Series    

FC Grinder Pumps Series

Application:

The FC series centrifugal grinder pumps easily handle residential, light commercial or industrial sanitary waste, reducing it to a fine slurry. The FC pump is designed for use in pressure sewer applications or any piping network.

 

Key Features:

    • Oil-filled motor for maximum motor cooling and constant bearing lubrication
    • On-Winding current and temperature-sensitive overload
    • Pressed stator for precise shaft / bearing alignment, long life
    • Shredding ring and grinder impeller are replaceable without dismantling pump or motor
    • New slicer cutter technology
    • Internal or external capacitor models are available
    • 300 Series Stainless Steel fasteners

     

     

Technical Data:

  • DISCHARGE ---------------- 1.25”NPT
  • LIQUID TEMPERATURE --- 120 degrees F (Continuous) 140 degrees F (Intermittent)
  • MOTOR HOUSING--------- Cast Iron, ASTM A-48, Class 30
  • CORD CAP ------------------- Cast Iron, ASTM A-48, Class 30
  • VOLUTE ---------------------- Cast Iron, ASTM A-48, Class 30
  • SEAL PLATE ----------------- Cast Iron, ASTM A-48, Class 30
  • IMPELLER -------- Ductile Iron, 10 vane, Open with Pump-out Vanes, Dynamically Balanced
  • SLICER-IMPELLER ----- Hardened 440C Stainless Steel 56-60 Rockwell C
  • PLATE-SLICER ----------- Hardened 440C Stainless Steel 56-60 Rockwell C
  • SHAFT ------------------- 420 Stainless Steel
  • SHAFT SEAL--- Mechanical
    Main (Motor): Carbide – Rotating Face Silicon – Stationary Face
    Secondary(Pump): Silicon – Rotating Face Silicon – Stationary Face
    Buna-N - Elastomer
  • BEARING (UPPER) ---- Single Row, Ball, Oil Lubricated
  • BEARING (LOWER)---- Single Row, Ball, Oil Lubricated
  • SLEEVE BEARING ----- Bronze with Oil Groove
  • HARDWARE------------ 300 Series Stainless Steel
  • O-RINGS ---------------- Buna-N
  • CORD ENTRY ---------- 30Ft Cord
    Triple Sealed Design
    Compression Grommet – Outer Jacket Seal
    Epoxy Potted – Inner Conductor Seal
    Butt Connector – Inner Wire Strand, Wicking Blockage
  • MOTOR (THREE PHASE) --- 2 HP, 3450 RPM, 60 Hz
    Tri-voltage, 200/230/460 volts.
    On-Winding temperature sensor
    Oil Filled, Class F
  • MOTOR (SINGLE PHASE) --- 2 HP, 3450 RPM, 60 Hz
    Dual-voltage, 200/230 volts
    Overload Protec on in the Motor
    Oil Filled, Class F
    Capacitor Start/Capacitor Run
  • OPTIONAL EQUIPMENT --- Seal Materials, Additional Cable Lengths, Leg Kits

Performance:

Model Hp Volt.
Ph		 FLA
amps		 Gal/Min @ Total Head in Feet Shut
off		 Weight
(lbs)
20 40 60 80 100 120
FC2-21 2 208~230/1 14.5 40 38 35 32 15   108 75
FC2-21C 2 208~230/1 14.5 40 38 35 32 15   108 75
FHC2-21 2 208~230/1 14.5 24 23 22 21 20 15 132 75
FHC2-21C 2 208~230/1 14.5 24 23 22 21 20 15 132 75
FC2-23 2 230/3 8.8 40 38 35 32 15   108 75
FHC2-23 2 230/3 8.8 24 23 22 21 20 15 132 75

Download the FC Grinder pumps brochure here