Stainless Steel Pumps

QDXB Series         WQ-B Series      WQ-BS Series

QDXBS Stainless Steel Pumps Series

Application:

Corrosion resistant Stainless Steel submersible dewatering pumps, specially designed for dewatering construciton sites, mines; subway,tunnels and civil engineering; utilities; residential and watewater discharge.

 

Key Features:

  • 1/4HP and 1/3HP
  • 304 Stainless Steel construction
  • 1.25”NPT top discharge, Vertical
  • Dual mechanical, 300 series Stainless Steel Parts
  • Air-filled motor

 

Technical Data:

  • DISCHARGE -  1.25" NPT. Vertical
  • SOLIDS HANDLING 1/8"
  • LIQUID TEMPERATURE 104 Degrees F. Contiuous, 140 Degrees F. Intermittent
  • MOTOR HOUSING 304 Stainless Steel
  • VOLUTE 304 Stainless Steel
  • SEAL PLATE 304 Stainless Steel
  • IMPELLER ABS      
  • SHAFT  Corrosion resistance stainless steel, threaded design.
  • BEARING (UPPER & LOWER) Ball bearing  construction to carry all radil and thrust loads
  • HARDWARE 300 Series Stainless Steel
  • SQUARE RINGS Buna-N
  • POWER CORD 20ft cord w/plug on 120 volt, pressure grommet for sealing and strain relief. U/L and CSA listed 14AWG Type SJTOW
  • DUAL MECHANICAL SEALS: 
    Stainless steel metal parts, BUNA-N elastomers
    Upper Seal: Carbon vs Ceramic
    Lower Seal: Silicon Carbide vs Silicon Carbide
  • MOTOR (SINGLE PHASE) 
    3450 RPM, 60Hz, 115 Volts, 2 Pole
    Air Filled, Class B
    Permanent Split Capacitor 
  • SIZE 6" X 6" X 12"

Performance:

Model Hp Volt.
Ph
FLA
amps
Gal/Min @ Total Head in Feet Shut
off
Weight
(lbs)
0 5 10 15 20 25
QDX180BS 1/4 115/1 3.0 29 26 21 12 7 4 29 14
QDX250BS 1/3 115/1 3.5 38 35 30 25 19 10 29 18